35 50 EDB101 edb10 20 70 13 35 edb105 edb104 edb103 edb102 EDB101 50 m, version:01 rrm j c thru features mechanical data case: db - molded plastic terminals: plated leads solderable per mil - std - 202, method 208 polarity: as marked on case mounting position: any marking: type number lead free: for rohs / lead free maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. type number symbol units peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v 100 200 400 600 v v rwm v dc rms reverse voltage v rms 70 140 280 420 v average rectified output current (note 1)@t a =40 i o 1.0 a non - repetitive peak forward surge current 8.3ms single half sine - wave superimposed on rated load (jedec method) i fsm a forward voltage per element @if=1.0a v fm v peak reverse current @t a =25 at rated dc blocking voltage @t a =125 i r 5.0 500 ua typical junction capacitance per leg pf typical thermal resistance per leg (note 2) r ja /w r jl operating and storage temperature range t j ,t stg - 55to+150 note:1. mounted on glass epoxy pc board with 1.3mm 2 solder pad. 2.measured at 1.0 mhz and applied reverse voltage of 4.0v d.c. 1 of 2 maximum reverse recovery time ns rr t note 3 5 0.95 1.25 1.7 www.dyelec.com 0 glass passivated die construction low forward voltage drop high current capability high surge current capability designed for surface mount application plastic material - ul flammability 94v - 0.358 0.335 9.1 8.5 0.024 0.016 0.60 0.40 0.193 0.209 4.9 5.3 0.179 0.195 4.55 4.95 8.9 0.350 8.0 0.315 0.0098 0.25 0.313 7.95 0.329 8.35 0.083 2.10 0.240 6.1 - + ~ ~ db-m 0.256 6.5 0.0059 0.15 0.098 2.50 dimensions in inches and millimeters single phase 1.0amp surface mount glass passivated bridge rectifier version 0.047 1.20 0.95 0.037
EDB101-edb103 edb105 5 edb10 edb104 EDB101 version:01 2 of 2 1.0 0.8 0.4 0.6 0 0.2 0 40 80 120 160 i , a verage for w a rd rectified current (a ) (a v) t , ambient temperature ( c) fi g . 1 output current deratin g curve a resistive or inductive load thru 60 40 20 pulse width =8.3ms 0 1.0 10 i , peak for w ard surge current (a) fsm number of cycles at 60 hz fi g . 3 maximum peak forward sur g e current ( per le g) t = 25 c single half sine-wave (jedec method) a 0.9 9 0.3 0.6 0.01 0.1 1.0 10 1.5 1.8 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fig .2t ypical forward characteristics (per leg) f t= 2 5 c pulse width = 300 s a 1.2 2.1 1000 100 10 1 0.1 0 20 40 60 80 100 120 140 i , inst ant aneous reverse current ( a) r percent of rated peak reverse voltage (%) fi g y pical reverse characteristics ( per element ) t = 25 c t = 125 c j j www.dyelec.com .4 t
|
